Skip to content

Lithium Pros 1018 24V 10A

SKU 1018

Lithium Pros
Lithium Pros' product page

Last updated: 16 September 2026

Battery and charging

Mains input it accepts
Universal input, 110–240 V at 50–60 Hz

“This 1018 24V 10A Lithium Ion Battery Charger is universal voltage meaning that it accepts anything from 110VAC~240VAC @ 50~60Hz.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Recharge time the maker states
Four to six hours on their own 24 V packs

“The 10A of output typically recharges Lithium Pros 24V Lithium Ion batteries in 4~6 hours. (Actual recharge time varies by specific application and energy consumed.)”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

When it stops charging
Stops when acceptance falls below 900 mA

“"End" in LCD display tells you that the battery reached normal "fully charged" voltage and that the current acceptance rate dropped to less than 900mA in a normal amount of time.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Size and fit

How it connects
Alligator clips

“It is 3 lbs and connects to the battery with alligator clips.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Stated weight
3 lb

“It is 3 lbs and connects to the battery with alligator clips.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Compatibility

Built for these batteries
Built for Lithium Pros' own 24 V marine packs

“1018 24V 10A Lithium Ion Battery Charger is purpose built for Lithium Pros 24V Lithium Ion Marine batteries.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Buying and owning it

What its lights mean
Two LEDs, plus an LCD reading “End” when finished

“Two LEDs show the simple status of the charger. The first status LED is red when input power is present. The second status LED is orange while charging and green when charging is complete and charging has stopped.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Fuse fitted
A 6.3 A 5×20 mm fuse, fitted

“It is fused protected with a 6.3A 5mm x 20mm fuse installed.”

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Compatible batteries

Lithium Pros' own charger and Lithium Pros' own pack. Their page for this charger says it is "purpose built for Lithium Pros 24V Lithium Ion Marine batteries", and this pack is one of their 24 volt batteries — Lithium Pros rate it at 25.6 volts, which is the same string of cells as their "24V" and both their names for it. They name a voltage and a family rather than a model, so this row is exactly as specific as they were: it places the pack inside the description the charger gives, and does not say the two were tested together. It connects with alligator clips rather than being wired in. Lithium Pros put the recharge time at four to six hours on their own 24 volt packs, and qualify it themselves: actual time varies by application and by how much energy was used. Charging and discharging are different questions: this is 10 amps going in, and Lithium Pros publish no discharge current for any of their packs, so nothing here says what the pack delivers.

Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

Sources

  • Lithium Pros 1018 24V 10A chargerManufacturer model page

    Source: lithiumpros.com/products/1018-24v-10a-lithium-ion-battery-charger

    Retrieved September 16, 2026