Last updated: 11 November 2026
Battery and charging
- Input voltage
- 190-260 Volts
- Charger output voltage
- 13.6 - 14.4 VDC
- Voltage at 100% state of charge
- 14.4 volts
- Charge method
- three modes of operation; Absorption, Bulk, and Float
- Charging voltage
- 13.6 volts
- Float voltage
- 13.2 volts
“Make sure the converter is plugged into a live AC source (190-260 Volts)”
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
“If the voltage reads 13.6 - 14.4 VDC (+/- 0.2) with no load, the converter is functioning properly”
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
“this will cause the converter to go into Bulk Mode, which means the target output voltage will change to 14.4 volts and a timer will start”
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
“regulates the amount of charge using three modes of operation; Absorption, Bulk, and Float”
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
“The converter normally provides a constant target output voltage of 13.6 volts (nominal) to power all the branch circuits”
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
“the converter will change to Float Mode with an output of 13.2 volts”
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
Identity
- Sales model
- WF-8855E
“WF-8855E Converter Charger Troubleshooting Chart –”
Source: wfcotech.com/shop/wfco-european-e-products-all/wf-8855e-converter-charger
Sources
- Archived document
Source: rvtechcheatsheet.com/manuals/wfco/wf-8855e-deckmount-converter-charger-operator-s-manual.pdf
Retrieved November 11, 2026
- WF-8855E Converter Charger Troubleshooting Chart –Archived document
Source: wfcotech.com/shop/wfco-european-e-products-all/wf-8855e-converter-charger
Retrieved October 21, 2026