Quick Charge Multi Bank Chargers
Last updated: 3 November 2026
Battery and charging
- How its banks are arranged
- independent from each other
- Input voltage
- 117 volt
- Charge indicator
- LED
- Charger output current
- 10 amp
“Since these chargers are independent from each other, you can set each circuit differently.”
Source: quickcharge.com/index_htm_files/multi bank charger Instructions.pdf
“117 volt chargers are equipped with a grounding type plug, 230 volt chargers are shipped without a plug.”
Source: quickcharge.com/index_htm_files/multi bank charger Instructions.pdf
“the LED will flash red for a few seconds, then turn steady red. When the cycle is 80% complete it will turn yellow, and finally green when cycle is complete.”
Source: quickcharge.com/index_htm_files/multi bank charger Instructions.pdf
“You can also charge a battery faster than the individual 10 amp rate by connecting more than one set of leads to a single battery.”
Source: quickcharge.com/index_htm_files/multi bank charger Instructions.pdf
Compatibility
- Batteries the maker says it charges
- gel, wet cell, AGM, and Lithium Ion Batteries
“For Industrial Use: Designed for gel, wet cell, AGM, and Lithium Ion Batteries”
Source: quickcharge.com/index_htm_files/multi bank charger Instructions.pdf
Sources
- Archived document
Source: quickcharge.com/index_htm_files/multi bank charger Instructions.pdf
Retrieved October 12, 2026