Ionic Multi Voltage Charger 36V10A, 12V10A
The Ionic Multi Voltage Charger 36V10A, 12V10A is a battery pack with a nominal voltage of 12V, 36V, a weight of 11 lbs and a supply of 110V/120VAC at 7.5A.
Last updated: 27 October 2026
Battery and charging
- Maximum charge voltage
- 43.8V (36V bank, 12-cell LiFePO4 absorption), 14.6V (12V bank, 4-cell LiFePO4 absorption)
- What bank one puts out
- 36V × 10A
- What bank two puts out
- 12V × 10A
- Rated output power
- 584W
- Input voltage
- 110V/120VAC at 7.5A
- Voltage
- 12V, 36V
- Charger
- This one has one 36V bank and one 12V bank, so it charges a 36V battery and a 12V battery at the same time, each at 10A — ideal for a boat running a 36V trolling motor plus a 12V cranking or electronics battery.
- Charge indicator
- Green = Power on / Charging complete ·, Red = Charging
- Charger output current
- 10A
- Battery types supported by the charger
- AGM, Lead-Acid, LiFePO4
Row from the maker’s page: “Charge Voltage” | “43.8V (36V bank, 12-cell LiFePO4 absorption), 14.6V (12V bank, 4-cell LiFePO4 absorption)”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Bank 1” | “36V × 10A”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Bank 2” | “12V × 10A”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Output Power” | “584W”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Input” | “110V/120VAC at 7.5A”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Voltage” | “12V, 36V”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
“Most multi-bank chargers only handle 12V batteries. This one has one 36V bank and one 12V bank, so it charges a 36V battery and a 12V battery at the same time, each at 10A — ideal for a boat running a 36V trolling motor plus a 12V cranking or electronics battery.”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “LED Status per Bank” | “Green = Power on / Charging complete ·, Red = Charging”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Max Charge Current” | “10A”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Compatible Battery Chemistry” | “AGM, Lead-Acid, LiFePO4”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Battery care and safety
- Charger timing cut-off
- Charger stops after 72 hours continuous charging (blinking red LEDs indicate timeout); disconnect and reconnect power to restart
Row from the maker’s page: “72-Hour Safety Auto-Stop” | “Charger stops after 72 hours continuous charging (blinking red LEDs indicate timeout); disconnect and reconnect power to restart”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Size and fit
- Overall dimensions
- 12" (L) × 9.5" (W) × 2" (H) 305x241x51 mm
- Stated weight
- 11 lbs
- Cable Garmin supply
- 60 inches (5 feet)
- Connector on the battery
- Each of the two banks has a 60-inch (5-foot) cable
Row from the maker’s page: “Dimensions” | “12" (L) × 9.5" (W) × 2" (H) 305x241x51 mm”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Weight” | “11 lbs”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Row from the maker’s page: “Cable Length per Bank” | “60 inches (5 feet)”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
“Each of the two banks has a 60-inch (5-foot) cable, so you can place your 36V and 12V batteries where they fit best rather than next to the charger.”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Identity
- Model code
- IC-12V10-CHP-M36
Row from the maker’s page: “Model” | “IC-12V10-CHP-M36”
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Sources
- Ionic Multi Voltage Charger 36V10A, 12V10A | LithiumHubArchived document
Source: lithiumhub.com/product/ionic-lithium-36v-multi-voltage-charger-36v10a-12v10a
Retrieved October 10, 2026